Mail Form
Products

Morris

Morris

Product Listing

Showing 1 - 13 of 13 Results Sort by
 
Morris MEG Antifreeze will protect all engines from frost damage right down to –34ºC and ice damage down to –50ºC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use.

This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580:1992 is designed to meet the demands of modern engines and their cooling systems. British Standard Number: BS6580:1992.

Morris MEG Antifreeze will protect all engines from frost damage right down to –34ºC and ice damage down to –50ºC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use.

This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580:1992 is designed to meet the demands of modern engines and their cooling systems. British Standard Number: BS6580:1992.

Stock: 62
Temporarily out of stock
£4.90
£4.90
AO-041
Sorry, this product is not available to purchase online
 
Morris MEG Antifreeze will protect all engines from frost damage right down to –34ºC and ice damage down to –50ºC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use.

This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580:1992 is designed to meet the demands of modern engines and their cooling systems.

Morris MEG Antifreeze will protect all engines from frost damage right down to –34ºC and ice damage down to –50ºC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use.

This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580:1992 is designed to meet the demands of modern engines and their cooling systems.

Stock: 101
Temporarily out of stock
£74.90
£74.90
AO-022
Sorry, this product is not available to purchase online
 
Morris MEG Antifreeze will protect all engines from frost damage right down to –34ºC and ice damage down to –50ºC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use.

This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580:1992 is designed to meet the demands of modern engines and their cooling systems.

Morris MEG Antifreeze will protect all engines from frost damage right down to –34ºC and ice damage down to –50ºC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use.

This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580:1992 is designed to meet the demands of modern engines and their cooling systems.

Stock: 137
Temporarily out of stock
£21.90
£21.90
AO-017
Sorry, this product is not available to purchase online
 
Morris K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and anti-friction bearings.

Morris K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and anti-friction bearings.

Stock: 1
Temporarily out of stock
£78.90
£78.90
AO-009
Sorry, this product is not available to purchase online
 
Morris K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and anti-friction bearings.

Morris K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and anti-friction bearings.

Stock: 42
Temporarily out of stock
£23.90
£23.90
AO-004
Sorry, this product is not available to purchase online
 
Morris K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and anti-friction bearings.

Morris K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and anti-friction bearings.

Stock: 64
Temporarily out of stock
£4.50
£4.50
AO-023
Sorry, this product is not available to purchase online
 
Morris Marine 10W-40 is a high quality, multigrade engine oil designed for use in canal boats. The additive level has been chosen and optimised to prevent bore glazing or bore polishing, whilst keeping engine components clean and protecting them from wear and corrosion.

Morris Marine 10W-40 is a high quality, multigrade engine oil designed for use in canal boats. The additive level has been chosen and optimised to prevent bore glazing or bore polishing, whilst keeping engine components clean and protecting them from wear and corrosion.

Stock: 127
Temporarily out of stock
£26.90
£26.90
AO-037
Sorry, this product is not available to purchase online
 
Morris MD-4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties. When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. Using the aerosol version, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is also an effective penetrating fluid for freeing all seized and corroded metal parts.

It has been designed with a very low surface tension, which gives it excellent penetrating power, and this, coupled with superior solvent and lubricating properties enables the most inaccessible corroded parts to be speedily dismantled. The residual oil film acts as a rust and corrosion preventative on the disassembled parts and helps reassembly.

Morris MD-4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties. When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. Using the aerosol version, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is also an effective penetrating fluid for freeing all seized and corroded metal parts.

It has been designed with a very low surface tension, which gives it excellent penetrating power, and this, coupled with superior solvent and lubricating properties enables the most inaccessible corroded parts to be speedily dismantled. The residual oil film acts as a rust and corrosion preventative on the disassembled parts and helps reassembly.

Stock: 18
Temporarily out of stock
£4.90
£4.90
AO-010
Sorry, this product is not available to purchase online
 
Morris Aquamax 2 is a high performance 2 stroke oil designed specifically for use in outboard and other 2 cycle engines. Performance rating's (API TC, NMMA TC-W3, R-94102B, JASO FB).

Morris Aquamax 2 is a high performance 2 stroke oil designed specifically for use in outboard and other 2 cycle engines. Performance rating's (API TC, NMMA TC-W3, R-94102B, JASO FB).

Stock: 14
Temporarily out of stock
£8.90
£8.90
AO-008
Sorry, this product is not available to purchase online
 
Morris Golden Film SAE 30 Classic Oil, High quality monograde engine oil designed for use in canal boat engines where this SAE may be required. Low detergent/dispersant lubricant, the perfect choice for light to reasonably loaded engines. Ratings (API CC / SD MIL-L-2104B).

Morris Golden Film SAE 30 Classic Oil, High quality monograde engine oil designed for use in canal boat engines where this SAE may be required. Low detergent/dispersant lubricant, the perfect choice for light to reasonably loaded engines. Ratings (API CC / SD MIL-L-2104B).

Stock: 69
Temporarily out of stock
£25.90
£25.90
AO-036
Sorry, this product is not available to purchase online
 
Morris EP Gear Oils are mineral oil based lubricants formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems. These grades have a high level of extreme pressure (EP) additive that provides effective gear protection over a range of temperatures and shock load conditions.

EP Gear oils also protect components from rust and corrosion.. Rating's (API GL5, MIL-L-2105D, ZF TE-ML 05A/07A/16B/17B).

Morris EP Gear Oils are mineral oil based lubricants formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems. These grades have a high level of extreme pressure (EP) additive that provides effective gear protection over a range of temperatures and shock load conditions.

EP Gear oils also protect components from rust and corrosion.. Rating's (API GL5, MIL-L-2105D, ZF TE-ML 05A/07A/16B/17B).

Stock: 17
Temporarily out of stock
£6.90
£6.90
AO-029
Sorry, this product is not available to purchase online
 
Morris Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and petrol engines requiring monograde oils. Performance rating's API(CF/CF-4/SF/SG), ACEA(E2).

Morris Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and petrol engines requiring monograde oils. Performance rating's API(CF/CF-4/SF/SG), ACEA(E2).

Stock: 3
Temporarily out of stock
£24.90
£24.90
AO-018
Sorry, this product is not available to purchase online
 
Morris Versimax HD3 monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and petrol engines requiring monograde oils.  Performance rating's API(CH-4/CF/SL), ACEA(A3/B3/B4/E3).

Morris Versimax HD3 monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and petrol engines requiring monograde oils. Performance rating's API(CH-4/CF/SL), ACEA(A3/B3/B4/E3).

Stock: 13
Temporarily out of stock
£25.90
£25.90
AO-001
Sorry, this product is not available to purchase online
Showing 1 - 13 of 13 Results Sort by