Mail Form
Products

Gauges & Instruments

Gauges & Instruments

Product Listing

Showing 1 - 9 of 9 Results Sort by
 
Solid brass Durite kit to adapt 1/8" NPTF senders to various SAE threads. Kit includes: 1 x 1/8" NPTF Female to 1/8" BSP Male (for pressure senders), 1 x 1/8" NPTF Female to 3/8" NPTF Male, 1 x 1/8" NPTF Female to 5/8" UNF Male, 1 x 1/8" NPTF Female to 1/2" NPTF Male.

Solid brass Durite kit to adapt 1/8" NPTF senders to various SAE threads. Kit includes: 1 x 1/8" NPTF Female to 1/8" BSP Male (for pressure senders), 1 x 1/8" NPTF Female to 3/8" NPTF Male, 1 x 1/8" NPTF Female to 5/8" UNF Male, 1 x 1/8" NPTF Female to 1/2" NPTF Male.

Stock: 2
Temporarily out of stock
£7.90
£7.90
EI-045
Sorry, this product is not available to purchase online
 
60- 0 60+ amp . Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

60- 0 60+ amp . Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

Stock: 5
Temporarily out of stock
£38.90
£38.90
EI-003
Sorry, this product is not available to purchase online
 
For 52mm diameter panel hole. 10 - 80 volt dc. Matt black rim and dial with white figures. Non-illuminated. Bridge fitting 75mm deep.

For 52mm diameter panel hole. 10 - 80 volt dc. Matt black rim and dial with white figures. Non-illuminated. Bridge fitting 75mm deep.

Stock: 3
Temporarily out of stock
£52.90
£52.90
EI-026
Sorry, this product is not available to purchase online
 
12 volt . Supplied with 1/8” NPTF sender. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

12 volt . Supplied with 1/8” NPTF sender. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

Stock: 4
Temporarily out of stock
£55.90
£55.90
EI-021
Sorry, this product is not available to purchase online
 
Durite tee piece for oil pressure gauge.

Durite tee piece for oil pressure gauge.

Stock: 2
Temporarily out of stock
£26.90
£26.90
EI-046
Sorry, this product is not available to purchase online
 
12 volt . Supplied with 1/8” NPTF sender. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

12 volt . Supplied with 1/8” NPTF sender. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

Stock: 3
Temporarily out of stock
£51.90
£51.90
EI-004
Sorry, this product is not available to purchase online
 
12 volt , 90° sweep dial. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

12 volt , 90° sweep dial. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting.

Stock: 4
Temporarily out of stock
£38.90
£38.90
EI-002
Sorry, this product is not available to purchase online
 
The unit works by measuring water pressure above the sensor. The result is displayed on a gauge because we believe this is the most accurate way of presenting the information and makes it easy to predict the “number of days to empty”. The gauge can be positioned anywhere in the boat as required.

The in-line sensor is used where there is no access to the tank or the construction of the tank is unsuitable. It is mounted between the tank and water pump using a 15mm or 22mm ‘T` fitting in the water pick up pipe between the tank and the pump. This is only suitable where the pipe can be run at approximately the same level as the bottom of the tank, we would suggest within 7.5 cm. The unit should be mounted within one metre of the tank, but if this is not possible please advise us when ordering.

The unit works by measuring water pressure above the sensor. The result is displayed on a gauge because we believe this is the most accurate way of presenting the information and makes it easy to predict the “number of days to empty”. The gauge can be positioned anywhere in the boat as required.

The in-line sensor is used where there is no access to the tank or the construction of the tank is unsuitable. It is mounted between the tank and water pump using a 15mm or 22mm ‘T` fitting in the water pick up pipe between the tank and the pump. This is only suitable where the pipe can be run at approximately the same level as the bottom of the tank, we would suggest within 7.5 cm. The unit should be mounted within one metre of the tank, but if this is not possible please advise us when ordering.

Stock: 25
Temporarily out of stock
£125.00
£125.00
EI-100
Sorry, this product is not available to purchase online
 
Are you one of the growing band of boaters who would like to know how much diesel fuel you have without the need to go through the messy business of dipping the tank? This system meets the relevant requirements of the Boat Safety Scheme PROVIDED that the installation instructions are followed carefully.

Are you one of the growing band of boaters who would like to know how much diesel fuel you have without the need to go through the messy business of dipping the tank? This system meets the relevant requirements of the Boat Safety Scheme PROVIDED that the installation instructions are followed carefully.

Stock: 4
Temporarily out of stock
£195.00
£195.00
EI-101
Sorry, this product is not available to purchase online
Showing 1 - 9 of 9 Results Sort by