Mail Form
Products

Drive Plates

Drive Plates

Product Listing

Showing 1 - 24 of 42 Results Sort by
1 2 > >>
 
Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various, 8mm holes. Typical application: Ford XLD/Mitsubishi Diameter (O/D): 266mm

Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various, 8mm holes. Typical application: Ford XLD/Mitsubishi Diameter (O/D): 266mm

Stock: 3
Temporarily out of stock
£125.00
£125.00
RD12AM37
Sorry, this product is not available to purchase online
 
Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Stock: 3
Temporarily out of stock
£94.90
£94.90
RD12AM4
Sorry, this product is not available to purchase online
 
Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 8x 8mm holes, 8.75" PCD. Typical application: Kubota/Perkins Diameter (O/D): 9.5" (SAE7.5)

Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 8x 8mm holes, 8.75" PCD. Typical application: Kubota/Perkins Diameter (O/D): 9.5" (SAE7.5)

Stock: 2
Temporarily out of stock
£84.00
£84.00
RD12AM49
Sorry, this product is not available to purchase online
 
DRIVE PLATE RD12AM60

Stock: 0
Temporarily out of stock
£129.00
£129.00
RD12AM60
Sorry, this product is not available to purchase online
 
Spline for 17-Tooth 24/48 DP (PRM Delta) input shaft. Two stage 'H/D' damper element. Back plate for mounting: Various,4 sets, 8mm holes. Typical application: BMC Diameter (O/D):298.5mm

Spline for 17-Tooth 24/48 DP (PRM Delta) input shaft. Two stage 'H/D' damper element. Back plate for mounting: Various,4 sets, 8mm holes. Typical application: BMC Diameter (O/D):298.5mm

Stock: 3
Temporarily out of stock
£125.00
£125.00
RD12AM8
Sorry, this product is not available to purchase online
 
DRIVE PLATE RD12B4

Stock: 0
Temporarily out of stock
£74.90
£74.90
RD12B4
Sorry, this product is not available to purchase online
 
Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: Various, 4 sets. 8mm holes Typical application: BMC. Diameter (O/D): 298.5mm

Spline for 17-Tooth 24/48DP (PRM Delta fine tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: Various, 4 sets. 8mm holes Typical application: BMC. Diameter (O/D): 298.5mm

Stock: 1
Temporarily out of stock
£97.90
£97.90
RD12B8
Sorry, this product is not available to purchase online
 
Drive plate.

Drive plate.

Stock: 1
Temporarily out of stock
£60.00
£60.00
RD12W49
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various, 8mm holes. Typical application: Ford XLD/Mitsubishi . Diameter (O/D): 266mm

Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various, 8mm holes. Typical application: Ford XLD/Mitsubishi . Diameter (O/D): 266mm

Stock: 0
Temporarily out of stock
£125.00
£125.00
RD13AM37
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Stock: 2
Temporarily out of stock
£94.90
£94.90
RD13AM4
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 8x 8mm holes, 8.75" PCD. Typical application: Kubota/Perkins, Kubota (Beta/Nanni). Diameter (O/D): 9.5" (SAE7.5)

Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 8x 8mm holes, 8.75" PCD. Typical application: Kubota/Perkins, Kubota (Beta/Nanni). Diameter (O/D): 9.5" (SAE7.5)

Stock: 1
Temporarily out of stock
£125.00
£125.00
RD13AM49
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth SAE1" (PRM160/260 style 1" diameter coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various. Typical application: BMC Diameter (O/D): 298.5mm

Spline for 10-Tooth SAE1" (PRM160/260 style 1" diameter coarse tooth) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various. Typical application: BMC Diameter (O/D): 298.5mm

Stock: 1
Temporarily out of stock
£119.00
£119.00
RD13AM8
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter coarse tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: Various, 8mm holes. Typical application: Ford XLD/Mitsubishi Diameter (O/D): 266mm

Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter coarse tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: Various, 8mm holes. Typical application: Ford XLD/Mitsubishi Diameter (O/D): 266mm

Stock: 2
Temporarily out of stock
£105.00
£105.00
RD13B37
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: 5 x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter, coarse tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: 5 x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Stock: 3
Temporarily out of stock
£74.90
£74.90
RD13B4
Sorry, this product is not available to purchase online
 
DRIVE PLATE RD13B60

Stock: 0
Temporarily out of stock
£105.00
£105.00
RD13B60
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter coarse tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: Various, 4 sets. Typical application: BMC Diameter (O/D): 298.5mm

Spline for 10-Tooth SAE1" (PRM 160/260 style 1" diameter coarse tooth) input shaft. Single stage 'loop' damper element. Back plate for mounting: Various, 4 sets. Typical application: BMC Diameter (O/D): 298.5mm

Stock: 2
Temporarily out of stock
£97.90
£97.90
RD13B8
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various, 8mm holes. Typical application: Ford XLD/Mitsubishi Diameter (O/D): 266mm

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 4 sets, various, 8mm holes. Typical application: Ford XLD/Mitsubishi Diameter (O/D): 266mm

Stock: 2
Temporarily out of stock
£125.00
£125.00
RD22AM37
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5x 6mm holes, 135mm PCD. Typical application: General Diameter (O/D): 156mm

Stock: 2
Temporarily out of stock
£94.90
£94.90
RD22AM4
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 8x 8mm holes, 8.75" PCD. Typical application: Kubota/Perkins, Kubota (Beta/Nanni). Diameter (O/D): 9.5" (SAE7.5)

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 8x 8mm holes, 8.75" PCD. Typical application: Kubota/Perkins, Kubota (Beta/Nanni). Diameter (O/D): 9.5" (SAE7.5)

Stock: 3
Temporarily out of stock
£125.00
£125.00
RD22AM49
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 6x 8mm holes, 7.875" PCD. Typical application: Kubota (Beta, Nanni). Diameter (O/D): 8.5" (SAE6.5)

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 6x 8mm holes, 7.875" PCD. Typical application: Kubota (Beta, Nanni). Diameter (O/D): 8.5" (SAE6.5)

Stock: 1
Temporarily out of stock
£129.00
£129.00
RD22AM60
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: Various, 4 sets. 8mm holes Typical application: BMC Diameter (O/D): 298.5mm

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: Various, 4 sets. 8mm holes Typical application: BMC Diameter (O/D): 298.5mm

Stock: 5
Temporarily out of stock
£119.00
£119.00
RD22AM8
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5 sets, various, 8mm holes. Typical application: Kubota (Beta/Nanni). Diameter (O/D): 314.3mm

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 5 sets, various, 8mm holes. Typical application: Kubota (Beta/Nanni). Diameter (O/D): 314.3mm

Stock: 0
Temporarily out of stock
£125.00
£125.00
RD22AM91
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 6x 8.1mm holes, 222.2" PCD. Typical application: Kubota (Beta) Diameter (O/D): 235mm

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Two stage 'H/D' damper element. Back plate for mounting: 6x 8.1mm holes, 222.2" PCD. Typical application: Kubota (Beta) Diameter (O/D): 235mm

Stock: 3
Temporarily out of stock
£129.00
£129.00
RD22AM95
Sorry, this product is not available to purchase online
 
Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Single stage 'loop' damper element. Back plate for mounting: 8 x 6mm holes, 140mm PCD. Typical application: Lister. Diameter (O/D): 152mm

Spline for 10-Tooth DIN 5464 (PRM 80/120/150, Hurth 100/125) input shaft. Single stage 'loop' damper element. Back plate for mounting: 8 x 6mm holes, 140mm PCD. Typical application: Lister. Diameter (O/D): 152mm

Stock: 4
Temporarily out of stock
£81.90
£81.90
RD22B16
Sorry, this product is not available to purchase online
Showing 1 - 24 of 42 Results Sort by
1 2 > >>