Mail Form
Products

Accessories

Accessories

Product Listing

Showing 1 - 23 of 23 Results Sort by
 
Completely redesigned and tested in the UK using top quality long life components. A 2 year warranty is included as standard.  A soft-start charging mode to improve recovery of deeply discharged batteries as low as 8 volts. Intelligent charging will cycle-charge in an attempt to recover sulphated batteries.  Suitable for all 12V automotive batteries including LITHIUM LiFePO4 motorcycle batteries. New voltage sensors quickly detect high current drain and will automatically revert to the most appropriate charge rate.

Completely redesigned and tested in the UK using top quality long life components. A 2 year warranty is included as standard. A soft-start charging mode to improve recovery of deeply discharged batteries as low as 8 volts. Intelligent charging will cycle-charge in an attempt to recover sulphated batteries. Suitable for all 12V automotive batteries including LITHIUM LiFePO4 motorcycle batteries. New voltage sensors quickly detect high current drain and will automatically revert to the most appropriate charge rate.

Stock: 20
Temporarily out of stock
£83.96
£83.96
30694
Sorry, this product is not available to purchase online
 
The Cyrix-CT battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a preset voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix-CT battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased. Suitable for 12/24V, 120A max.

The Cyrix-CT battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a preset voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix-CT battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased. Suitable for 12/24V, 120A max.

Stock: 7
Temporarily out of stock
£41.90
£41.90
VV-044
Sorry, this product is not available to purchase online
 
12V 120A extra heavy duty make and break relay, with fixing bracket. Extra heavy duty relay Rated 120A at 12V DC. 2 x 6.3mm blade type terminals. 2 x M6 studs.

12V 120A extra heavy duty make and break relay, with fixing bracket. Extra heavy duty relay Rated 120A at 12V DC. 2 x 6.3mm blade type terminals. 2 x M6 studs.

Stock: 11
Temporarily out of stock
£37.90
£37.90
VS-105
Sorry, this product is not available to purchase online
 
Durite 0-727-33, 12V 140A Voltage Sensitive Split Charge Relay 12V 140A Voltage sensitive relay, Features: - Current Rated at 12V, 140A. With red LED indicator, CE approved product, relay makes (cuts in) at 13.3V and breaks (cuts out) at 12.8V, allows split charging of second battery bank without discharging the primary or start battery.

Dimensions:- 51mm deep by 66 mm square.

Durite 0-727-33, 12V 140A Voltage Sensitive Split Charge Relay 12V 140A Voltage sensitive relay, Features: - Current Rated at 12V, 140A. With red LED indicator, CE approved product, relay makes (cuts in) at 13.3V and breaks (cuts out) at 12.8V, allows split charging of second battery bank without discharging the primary or start battery.

Dimensions:- 51mm deep by 66 mm square.

Stock: 20
Temporarily out of stock
£66.90
£66.90
VS-272
Sorry, this product is not available to purchase online
 
Durite 0-727-23 Relay, 12V 70A-20A Split Charge Relay - 12v 70A.

For 12V applications. Current rated 70A-20A at 12V DC. Isolates fridge circuit separately. 2 x 2.8mm blade terminals. 1 x 6.3mm blade terminals.2 x 9.5mm blade terminals.

Durite 0-727-23 Relay, 12V 70A-20A Split Charge Relay - 12v 70A.

For 12V applications. Current rated 70A-20A at 12V DC. Isolates fridge circuit separately. 2 x 2.8mm blade terminals. 1 x 6.3mm blade terminals.2 x 9.5mm blade terminals.

Stock: 8
Temporarily out of stock
£43.90
£43.90
VS-002
Sorry, this product is not available to purchase online
 
RJ45 Patch lead.1 Metre.

RJ45 Patch lead.1 Metre.

Stock: 3
Temporarily out of stock
£4.50
£4.50
VV-022
Sorry, this product is not available to purchase online
 
Optional remote control panel for Sterling 'PCU' range. Digital display with menu and set-up functions. Includes 10m of cable Dimensions (H x W x D)mm: 110 x 68 x 20

Optional remote control panel for Sterling 'PCU' range. Digital display with menu and set-up functions. Includes 10m of cable Dimensions (H x W x D)mm: 110 x 68 x 20

Stock: 3
Temporarily out of stock
£83.99
£83.99
VS-346
Sorry, this product is not available to purchase online
 
Heavy duty 12v battery, alternator and starter motor tester. 3 LED display indicates extent of battery sulphation.

Heavy duty 12v battery, alternator and starter motor tester. 3 LED display indicates extent of battery sulphation.

Stock: 1
Temporarily out of stock
£55.99
£55.99
VS-354
Sorry, this product is not available to purchase online
 
130A 1 in 2 out Split charge Diode. Comes with rubber boots for cables Dimensions (H x W x D): 85 x 115 x170 mm (inc terminals) Connections Type: 8mm studs Reference/Manufacturer Number: Pro Split D 130A

130A 1 in 2 out Split charge Diode. Comes with rubber boots for cables Dimensions (H x W x D): 85 x 115 x170 mm (inc terminals) Connections Type: 8mm studs Reference/Manufacturer Number: Pro Split D 130A

Stock: 4
Temporarily out of stock
£76.99
£76.99
VS-041
Sorry, this product is not available to purchase online
 
70A 1 in 2 out Split charge Diode. Comes with rubber boots for cables Dimensions (H x W x D): 85 x 80 x120 mm (inc terminals) Connections Type: 6mm studs Reference/Manufacturer Number: Pro Split D 70A

70A 1 in 2 out Split charge Diode. Comes with rubber boots for cables Dimensions (H x W x D): 85 x 80 x120 mm (inc terminals) Connections Type: 6mm studs Reference/Manufacturer Number: Pro Split D 70A

Stock: 1
Temporarily out of stock
£38.99
£38.99
VS-039
Sorry, this product is not available to purchase online
 
90A 1 in 2 out Split charge Diode. Comes with rubber boots for cables Dimensions (H x W x D): 85 x 120 x105 mm (inc terminals) Connections Type: 6mm studs Reference/Manufacturer Number: Pro Split D 90A

90A 1 in 2 out Split charge Diode. Comes with rubber boots for cables Dimensions (H x W x D): 85 x 120 x105 mm (inc terminals) Connections Type: 6mm studs Reference/Manufacturer Number: Pro Split D 90A

Stock: 1
Temporarily out of stock
£55.99
£55.99
VS-040
Sorry, this product is not available to purchase online
 
Supplied with 10m cable. Power, overload and over temp indicators.

Supplied with 10m cable. Power, overload and over temp indicators.

Stock: 7
Temporarily out of stock
£31.50
£31.50
VL-456
Sorry, this product is not available to purchase online
 
The ProSplit R is an advanced split charge management device, developed specifically to deal with the complex nature of modern multi battery systems in boats and vehicles. For single or dual alternator inputs to two, three or four battery bank installations. Complex software with some 1000 lines of code analyses every perceivable condition to ensure charging priorities are managed as you want with specific focus on preserving charge in the engine starter battery. Each input & output terminal is independently monitored to establish status before deciding where charge will be delivered and to prevent discharge from one battery to another. Truly zero voltage drop is one key feature of the Pro Split R.

Many alternative products claim to have no voltage loss but, under test, are proven not to be so - especially with heavy loads - when it really matters. It may not seem significant but 1V drop equates to as much as 30% lost charging power in a 12V system. Unlike conventional Voltage Sensitive Relays (VSRs), the ProSplit R has the ability to identify and reverse current or over-voltage conditions and disconnect individual batteries to avoid damage or discharge. The ignition sense connection also ensures that the device knows the engine is running and protects the start battery when the engine is off.Specification: Alt Volts: 12, Max Alt Amps: 120, Output Battery Bank: 2 out, Unit Size (mm): 150 x 80 x 120, Unit Weight (kg): 0.6

The ProSplit R is an advanced split charge management device, developed specifically to deal with the complex nature of modern multi battery systems in boats and vehicles. For single or dual alternator inputs to two, three or four battery bank installations. Complex software with some 1000 lines of code analyses every perceivable condition to ensure charging priorities are managed as you want with specific focus on preserving charge in the engine starter battery. Each input & output terminal is independently monitored to establish status before deciding where charge will be delivered and to prevent discharge from one battery to another. Truly zero voltage drop is one key feature of the Pro Split R.

Many alternative products claim to have no voltage loss but, under test, are proven not to be so - especially with heavy loads - when it really matters. It may not seem significant but 1V drop equates to as much as 30% lost charging power in a 12V system. Unlike conventional Voltage Sensitive Relays (VSRs), the ProSplit R has the ability to identify and reverse current or over-voltage conditions and disconnect individual batteries to avoid damage or discharge. The ignition sense connection also ensures that the device knows the engine is running and protects the start battery when the engine is off.Specification: Alt Volts: 12, Max Alt Amps: 120, Output Battery Bank: 2 out, Unit Size (mm): 150 x 80 x 120, Unit Weight (kg): 0.6

Stock: 2
Temporarily out of stock
£129.00
£129.00
VL-319
Sorry, this product is not available to purchase online
 
12V 180A Waterproof Alternator Distribution system with 0.0V voltage drop for charging two battery banks. Comes with cable boots Dimensions (H x W x D): 70 x 150 x 150 mm (inc terminals) Connections Type: Gold studs (10mm for battery and alternator) Reference/Manufacturer Number: Pro Split R 182

12V 180A Waterproof Alternator Distribution system with 0.0V voltage drop for charging two battery banks. Comes with cable boots Dimensions (H x W x D): 70 x 150 x 150 mm (inc terminals) Connections Type: Gold studs (10mm for battery and alternator) Reference/Manufacturer Number: Pro Split R 182

Stock: 1
Temporarily out of stock
£99.60
£99.60
VL-326
Sorry, this product is not available to purchase online
 
12V / 24V Advanced Digital Alternator Regulator. Comes with two temp sensors and cable. Can be used with optional LCD Remote control. Colour: Red / Black Dimensions (H x W x D): 60 x 90 x 170 Connections Type: Fitted cables, screw terminals and socket for optional remote control.

12V / 24V Advanced Digital Alternator Regulator. Comes with two temp sensors and cable. Can be used with optional LCD Remote control. Colour: Red / Black Dimensions (H x W x D): 60 x 90 x 170 Connections Type: Fitted cables, screw terminals and socket for optional remote control.

Stock: 0
Temporarily out of stock
£179.00
£179.00
VR-003
Sorry, this product is not available to purchase online
 
This Sterling ProAlt C Remote control is an optional accessory for the 80A & 130A alternator to battery chargers. It enables you switch the unit on and off as well as giving detailed information about volts, amps and temperatures. Includes 10 metres of pre-wired cable. Dimensions (L x W x D): 110mm x 68mm x 20mm.

This Sterling ProAlt C Remote control is an optional accessory for the 80A & 130A alternator to battery chargers. It enables you switch the unit on and off as well as giving detailed information about volts, amps and temperatures. Includes 10 metres of pre-wired cable. Dimensions (L x W x D): 110mm x 68mm x 20mm.

Stock: 2
Temporarily out of stock
£106.06
£106.06
VS-164
Sorry, this product is not available to purchase online
 
Remote control for use with Sterling chargers. Comes with pre wired connecting cable, two shunts and two 350mm (approx. including lugs) lengths of 50mm cable. Colour: Black Dimensions (H x W x D): 40 x 170 x 95 mm

Remote control for use with Sterling chargers. Comes with pre wired connecting cable, two shunts and two 350mm (approx. including lugs) lengths of 50mm cable. Colour: Black Dimensions (H x W x D): 40 x 170 x 95 mm

Stock: 1
Temporarily out of stock
£209.00
£209.00
VS-239
Sorry, this product is not available to purchase online
 
Shunt (200A) for use with PMP1 Power Management Panel (see Midland Chandlers part no VL-015). Dimensions (H x W x D): 195x40x48mm. Reference/Manufacturer Number: S200A

Shunt (200A) for use with PMP1 Power Management Panel (see Midland Chandlers part no VL-015). Dimensions (H x W x D): 195x40x48mm. Reference/Manufacturer Number: S200A

Stock: 4
Temporarily out of stock
£67.99
£67.99
VL-016
Sorry, this product is not available to purchase online
 
The Cyrix-ct battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a preset voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix-ct battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

The Cyrix-ct battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a preset voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix-ct battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

Stock: 2
Temporarily out of stock
£109.00
£109.00
VV-045
Sorry, this product is not available to purchase online
 
Use this to connect your Victron Phoenix Multi or Multi Plus to the Remote Control Panel. 10 Metre lead.

Use this to connect your Victron Phoenix Multi or Multi Plus to the Remote Control Panel. 10 Metre lead.

Stock: 12
Temporarily out of stock
£9.90
£9.90
VV-018
Sorry, this product is not available to purchase online
 
Use this to connect your Victron Phoenix Multi or Multi Plus to the Remote Control Panel. 5 Metre lead.

Use this to connect your Victron Phoenix Multi or Multi Plus to the Remote Control Panel. 5 Metre lead.

Stock: 20
Temporarily out of stock
£6.90
£6.90
VV-017
Sorry, this product is not available to purchase online
 
Suitable for Phoenix 1200, 1600, 2000 & 3000 Inverters Brightness of the LED's is automatically reduced during night time Dimensions( H x W x D)mm: 65 x 60 x 40

Suitable for Phoenix 1200, 1600, 2000 & 3000 Inverters Brightness of the LED's is automatically reduced during night time Dimensions( H x W x D)mm: 65 x 60 x 40

Stock: 2
Temporarily out of stock
£79.90
£79.90
VV-016
Sorry, this product is not available to purchase online
 
Victron Pheoenix multi control panel 200A.

Victron Pheoenix multi control panel 200A.

Stock: 10
Temporarily out of stock
£145.00
£145.00
VV-031
Sorry, this product is not available to purchase online
Showing 1 - 23 of 23 Results Sort by
Midland Chandlers Chat
Click to chat