Mail Form
Products

Deck/Hull Fittings

Deck/Hull Fittings

Product Listing

Showing 1 - 24 of 195 Results Sort by
1 2 3 4 5 ... > >>
 
Chrome Plated diesel deck filler with flush handle complete with stainless steel cable (for attachment / retaining cap). Filler neck o.d. 38mm (1 1/2")R.I.N.A. approved.

Chrome Plated diesel deck filler with flush handle complete with stainless steel cable (for attachment / retaining cap). Filler neck o.d. 38mm (1 1/2")R.I.N.A. approved.

Stock: 16
Temporarily out of stock
£25.90
£25.90
AD-073
Sorry, this product is not available to purchase online
 
Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" (145mm).

Thread size: 3/4" BSP. Hose tail: 7/8" (22mm) outside diameter. Material: Brass (not suitable for salt water use).

Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" (145mm).

Thread size: 3/4" BSP. Hose tail: 7/8" (22mm) outside diameter. Material: Brass (not suitable for salt water use).

Stock: 14
Temporarily out of stock
£9.90
£9.90
AD-067
Sorry, this product is not available to purchase online
 
Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" (145mm).

Thread size: 3/4" BSP. Hose tail: 7/8" (22mm) outside diameter. Material: Chromed Brass (not suitable for salt water use).

Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" (145mm).

Thread size: 3/4" BSP. Hose tail: 7/8" (22mm) outside diameter. Material: Chromed Brass (not suitable for salt water use).

Stock: 0
Temporarily out of stock
£9.90
£9.90
AD-068
Sorry, this product is not available to purchase online
 
Multipurpose non slip grip mat. Will grip & protect almost any surface. Mat will not move once positioned. Position under rugs for non-slip properties. Easy to cut with scissors.

Multipurpose non slip grip mat. Will grip & protect almost any surface. Mat will not move once positioned. Position under rugs for non-slip properties. Easy to cut with scissors.

Stock: 30
Temporarily out of stock
£3.90
£3.90
DT-097
Sorry, this product is not available to purchase online
 
Weldable steel bollard. Diameter: 55mm (base diameter), 70mm (upper diameter), length: 120mm.

A high quality product made in the UK.

Weldable steel bollard. Diameter: 55mm (base diameter), 70mm (upper diameter), length: 120mm.

A high quality product made in the UK.

Stock: 7
Temporarily out of stock
£18.90
£18.90
AD-037
Sorry, this product is not available to purchase online
 
Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 4 7/8" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Brass (not suitable for salt water use).

Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 4 7/8" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Brass (not suitable for salt water use).

Stock: 43
Temporarily out of stock
£9.90
£9.90
AD-135
Sorry, this product is not available to purchase online
 
Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Brass (not suitable for salt water use).

Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Brass (not suitable for salt water use).

Stock: 39
Temporarily out of stock
£10.50
£10.50
AD-200
Sorry, this product is not available to purchase online
 
Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 4 7/8" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Chromes brass (not suitable for salt water use).

Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 4 7/8" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Chromes brass (not suitable for salt water use).

Stock: 25
Temporarily out of stock
£9.90
£9.90
AD-136
Sorry, this product is not available to purchase online
 
Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Chromes brass (not suitable for salt water use).

Traditional style skin fitting to allow waste water to pass through the hull of a boat, but extended (lengthened) design to allow for hull bracing/insulation materials. Total length: 5 3/4" Thread size: 3/4" BSP. Hose tail: 3/4" (19mm) outside diameter. Material: Chromes brass (not suitable for salt water use).

Stock: 39
Temporarily out of stock
£10.50
£10.50
AD-201
Sorry, this product is not available to purchase online
 
Weldable steel bollard. Drilled and tapped with 1/2" BSP thread for venting fuel tanks. Diameter: 55mm (base diameter), 70mm (upper diameter), length: 120mm.

A high quality product made in the UK.

Weldable steel bollard. Drilled and tapped with 1/2" BSP thread for venting fuel tanks. Diameter: 55mm (base diameter), 70mm (upper diameter), length: 120mm.

A high quality product made in the UK.

Stock: 3
Temporarily out of stock
£21.50
£21.50
AD-038
Sorry, this product is not available to purchase online
 
Solid brass tiller hinge with stainless steel joining pin. Chrome plated finish. Fits 1.1/4" internal diameter tubes.

Solid brass tiller hinge with stainless steel joining pin. Chrome plated finish. Fits 1.1/4" internal diameter tubes.

Stock: 38
Temporarily out of stock
£64.90
£64.90
AT-031
Sorry, this product is not available to purchase online
 
30" long solid brass tiller tube, with an internal diameter of 1.1/4". Chrome plated finish. Wooden handle not included.

30" long solid brass tiller tube, with an internal diameter of 1.1/4". Chrome plated finish. Wooden handle not included.

Stock: 39
Temporarily out of stock
£52.90
£52.90
AT-035
Sorry, this product is not available to purchase online
 
24" long solid brass tiller tube, with an internal diameter of 1.1/4". Chrome plated finish. Wooden handle not included.

24" long solid brass tiller tube, with an internal diameter of 1.1/4". Chrome plated finish. Wooden handle not included.

Stock: 25
Temporarily out of stock
£47.90
£47.90
AT-034
Sorry, this product is not available to purchase online
 
24" long solid brass tiller tube, with an internal diameter of 1.1/4". Polished Brass finish. Wooden handle not included.

24" long solid brass tiller tube, with an internal diameter of 1.1/4". Polished Brass finish. Wooden handle not included.

Stock: 41
Temporarily out of stock
£34.90
£34.90
AT-032
Sorry, this product is not available to purchase online
 
30" long solid brass tiller tube, with an internal diameter of 1.1/4". Polished Brass finish. Wooden handle not included.

30" long solid brass tiller tube, with an internal diameter of 1.1/4". Polished Brass finish. Wooden handle not included.

Stock: 41
Temporarily out of stock
£39.90
£39.90
AT-033
Sorry, this product is not available to purchase online
 
Skin Fitting 1.1/2" with 1/1.2” hose tail.

Skin Fitting 1.1/2" with 1/1.2” hose tail.

Stock: 11
Temporarily out of stock
£17.70
£17.70
AD-031
Sorry, this product is not available to purchase online
 
Black plastic 4 way feed gland. Used for roof cable entry for solar panels, rear view systems, antennas etc.

Black plastic 4 way feed gland. Used for roof cable entry for solar panels, rear view systems, antennas etc.

Stock: 6
Temporarily out of stock
£29.90
£29.90
30828
Sorry, this product is not available to purchase online
 
600 D.C Skin fitting. 1/2", Chrome.

600 D.C Skin fitting. 1/2", Chrome.

Stock: 12
Temporarily out of stock
£9.20
£9.20
AD-049
Sorry, this product is not available to purchase online
 
600 D.L Skin fitting. 3/4", Brass.

600 D.L Skin fitting. 3/4", Brass.

Stock: 8
Temporarily out of stock
£7.30
£7.30
AD-020
Sorry, this product is not available to purchase online
 
600 E.C Skin fitting. 3/4", Chrome.

600 E.C Skin fitting. 3/4", Chrome.

Stock: 11
Temporarily out of stock
£12.90
£12.90
AD-050
Sorry, this product is not available to purchase online
 
600 E.L Skin fitting. 3/4", Brass.

600 E.L Skin fitting. 3/4", Brass.

Stock: 6
Temporarily out of stock
£9.95
£9.95
AD-021
Sorry, this product is not available to purchase online
 
600 F.C Skin fitting. 1", Chrome.

600 F.C Skin fitting. 1", Chrome.

Stock: 0
Temporarily out of stock
£16.30
£16.30
AD-051
Sorry, this product is not available to purchase online
 
600 F.L Skin fitting. 1", Brass.

600 F.L Skin fitting. 1", Brass.

Stock: 6
Temporarily out of stock
£13.60
£13.60
AD-022
Sorry, this product is not available to purchase online
 
600 G.C Skin fitting. 1 1/4", Chrome.

600 G.C Skin fitting. 1 1/4", Chrome.

Stock: 12
Temporarily out of stock
£21.65
£21.65
AD-052
Sorry, this product is not available to purchase online
Showing 1 - 24 of 195 Results Sort by
1 2 3 4 5 ... > >>